<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:signature_tuning_pane

Signature Tuning Tab

This tab contains all of the most effective parameters for “tuning” the accuracy of color signatures. To bring up the Signature Tuning Tab, first bring up the Configure Dialog (click on the gear icon or select File➜Configure). Now select the Signature Tuning tab under Pixy Parameters (it should be the first pane you see when you bring up the Configuration Dialog).

d929acfbf583267709d9e116b9ce3a279697a207.jpg

  • Signature ranges: Signature range tuning is probably the most effective method to improve detection accuracy. Each color signature (1 through 7) has a slider to adjust the inclusiveness of the corresponding signature. Slide the slider to the left if you want the signature to be less inclusive (you're seeing false positives) or slide it to the right if you want the signature to be more inclusive (you're getting false negatives.) There is more information here.
  • Min brightness: sets a minimum brightness setting for all signatures. That is, if a pixel is below the minimum brightness setting, it won't be considered as part of any color signature. So if you are seeing false positives that are sufficiently dark, you can adjust the Min brightness setting higher to reduce the false positives. If you are not able to detect objects that are sufficiently dark, you can adjust the Min brightness setting lower to reduce the false negatives.
  • Camera brightness: sets the exposure setting of Pixy, which controls the brightness of the image. The Camera Brightness setting is important because the correct exposure setting will lead to the best detection accuracy. It is recommended to enable Overexposure highlighting (in the PixyMon Parameters pane) to prevent overexposure of the objects you wish to detection. There is more information here.
wiki/v2/signature_tuning_pane.txt · Last modified: 2018/04/09 21:52 by jfrench