Pixy2 Quick Links
Basics
Connecting Pixy2 to…
Pixy2 Modes / Programs
Software and Support
Sidebar
wiki:v2:line_expert
**This is an old revision of the document!**
Line tracking expert tab
This tab contains more advanced parameters for adjusting various line tracking things. To bring up this tab, you must be running the line_tracking program by selecting it in the Program menu, and then bringing up the Configure Dialog (click on the gear icon 
or select File➜Configure). Now select the Expert tab under Pixy Parameters.
- Edge distance:
- Line extraction distance:
- Maximum line compare:
- Maximum merge distance:
- Minimum line length:
- Line filtering:
- Intersection filtering:
- Barcode filtering:
- Default turn angle:
- Delayed turn:
- Manual vector select:
- Default program: This parameter shows up in all Expert tabs regardless of the program that's currently running. It sets the program that gets executed upon power-up. The available programs are listed in the pulldown menu.
- Program select on power-up: This parameter shows up in all Expert tabs regardless of the program that's currently running. Enabling this will enable the button program selection upon power-up.
- Debug: This parameter shows up in all Expert tabs regardless of the program that's currently running. It sets the debug level within Pixy2. Setting the value to 0 means that no debugging information is displayed.
wiki/v2/line_expert.1528253420.txt.gz · Last modified: 2018/06/06 02:50 by pixycam
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
