<< return to Pixycam.com

User Tools

Site Tools


**This is an old revision of the document!**

Barcode Labels tab

The Barcode Labels tab allows you to label barcodes that are detected by Pixy2. To bring up this tab, you must be running the line_tracking program by selecting it in the Program menu, and then bringing up the Configure Dialog (click on the gear icon or select File➜Configure). Now select the Barcode Labels tab under Pixy Parameters.

Note that the barcode labels are stored on Pixy2. So if you set some signature labels and then plug your Pixy2 into another computer running PixyMon, the labels will be there.

To label a barcode, simply type in the label and click on Apply or OK.

Detected barcodes that match this barcode will then be labeled in PixyMon.

wiki/v2/barcode_labels_pane.1528233173.txt.gz · Last modified: 2018/06/05 21:12 by pixycam