You will need a USB micro cable for your computer to talk to Pixy2. This cable is included with Pixy2.

Download the latest PixyMon version here. and run the installer. Don't plug in your Pixy into your computer yet though.

When installing PixyMon on a Windows Vista, 7, 8, 10, or 11 machine, installation will proceed as expected, until you get to the driver pre-installation. The message “Pre-installing device drivers. Please be patient!” will be displayed, and after a few moments, you'll see a dialog that looks like this:

Go ahead an click on “Install”. Windows will crunch some more and eventually display the same dialog again. (Pixy2 has two device drivers that need to be installed.) Click on “Install” again when you see the new dialog. Windows will crunch again (Windows is performing a system restore point.) The driver installation can take a couple minutes, so be patient.

And then you're done.

Now plug in your Pixy2 into your computer with a USB mini cable.

And run PixyMon by selecting it from the Start menu (or the Start screen if you're running Windows 8.) When PixyMon first comes up, you may see the
message “error: No pixy devices have been detected” until the driver is finished installing. You will probably see a system tray message like this one:

When the driver is finished installing, PixyMon will connect to your Pixy2 and start displaying color connected components data (This is the default data that's streamed from Pixy2, consisting of a list of detected objects, their locations and sizes, overlaid over raw video, but since Pixy2 probably hasn't learned any color signatures yet, you'll probably only get raw video.)

What's next? Let's teach Pixy an object!

If the driver pre-installation window did not show up during install, try going into the driver folder (typically C:/Program Files(x86)/Pixy/driver) and double clicking on the “.inf” files to manually install.

If PixyMon still displays the message “error: No Pixy devices have been detected” even after everything is installed, you may have a device driver issue. Computers with a Renesas host controller generally need their drivers updated - click here for more info.

If you're not able to run PixyMon successfully, please try manually adding the program to Windows Defender Exclusion List, as described here.