<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:mounting_pixy_with_lego

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:v2:mounting_pixy_with_lego [2019/01/30 20:25]
pixycam
wiki:v2:mounting_pixy_with_lego [2019/01/30 20:27] (current)
pixycam
Line 43: Line 43:
 \\ \\
 4. Slide the Pixy2 into the brick assembly. It should fit nice and snug! Use two of the **medium fasteners**,​ and insert them from the inside as shown in the picture.\\ 4. Slide the Pixy2 into the brick assembly. It should fit nice and snug! Use two of the **medium fasteners**,​ and insert them from the inside as shown in the picture.\\
-{{wiki:img:9f58a7327757cbb7950b00c046594788b98e3104.jpg?400}}+{{wiki:v1:img_5332_result.jpg?400}}
 \\ \\
 \\ \\
 The fasteners form an axle that you can use to tilt Pixy2 up and down. Inserting the screws from the inside allows you to tighten them down, so Pixy2 holds the desired tilt angle.\\ The fasteners form an axle that you can use to tilt Pixy2 up and down. Inserting the screws from the inside allows you to tighten them down, so Pixy2 holds the desired tilt angle.\\
-{{wiki:img:4ef644598e54018a30718786b257b64ee3932b80.jpg?400}}+{{wiki:v1:img_5335_result.jpg?400}}
  
  

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on “Create this page”.

wiki/v2/mounting_pixy_with_lego.txt · Last modified: 2019/01/30 20:27 by pixycam