Pixymon Configuration Parameters

Max blocks
- Sets the maximum total blocks sent per frame.
- default: 1000
Max blocks per signature
- Sets the maximum blocks for each color signature sent for each frame.
- default: 1000
Min block area
- Sets the minimum required area in pixels for a block. Blocks with less area won't be sent.
- default: 20
Min saturation
- Sets the minimum allowed color saturation for when generating color signatures. Applies during teaching.
- default: 10.0
Hue spread
- Sets how inclusive the color signatures are with respect to hue. Applies during teaching.
- default: 1.0
Saturation spread
- Sets how inclusive the color signatures are with respect to saturation. Applies during teaching.
- default: 1.0
Data out port
- Selects the port that's is used to output data. 0=SPI, 1=I2C, 2=UART, 3=analog/digital x, 4=analog/digital y
- default: 0
I2C address
- Sets the I2C address if you are using I2C data out port.
- default: 0x54
UART baudrate
- Sets the UART baudrate if you are using UART data out port.
- default: 19200
Default program
- Selects the program number that's run by default upon power-up.
- default: 0
Brightness
- Sets the average brightness of the camera, can be between 0 and 255.
- default: 80

Documentation