<< return to Pixycam.com

User Tools

Site Tools


wiki:v3:some_tips_on_generating_color_signatures_2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wiki:v3:some_tips_on_generating_color_signatures_2 [2018/09/21 01:25]
pixycam
wiki:v3:some_tips_on_generating_color_signatures_2 [2018/09/27 17:01] (current)
pixycam
Line 29: Line 29:
  
 You can adjust all seven color signatures this way to maximize detection accuracy. Be sure to press **Apply** or **OK** to save the slider ranges! The adjusted values won't be saved if you press **Cancel** or dismiss the dialog. You can adjust all seven color signatures this way to maximize detection accuracy. Be sure to press **Apply** or **OK** to save the slider ranges! The adjusted values won't be saved if you press **Cancel** or dismiss the dialog.
 +
  
 ==== Adjust minimum frames per second ==== ==== Adjust minimum frames per second ====
  
-Adjusting the **Min frames per second** slider to lower values can improve the image quality by reducing the noise and/or improving the exposure in low-light environments. ​ The disadvantage of lowering ​the frames per second is that it reduces Pixy2'​s update rate.  ​+ 
 +Adjusting the **Min frames per second** slider ​in the **Camera** tab to smaller ​values can improve the image quality by reducing the noise and/or improving the exposure in low-light environments. ​ The disadvantage of reducing ​the frames per second is that it reduces Pixy2'​s update rate.  ​ 
 + 
 + 
 +{{wiki:​v2:​image_506.png}} 
 + 
 + 
 +The two pictures below show a low-light scene and the reduction in noise by reducing the frames per second. ​ (The left frame is higher fps, more noise.) 
 + 
 +{{wiki:​v2:​image_507.png?​350|Higher fps, more noise}} 
 +{{wiki:​v2:​image_509.png?​350|Lower fps, less noise}} 
 + 
 + 
 +==== Increase block filtering ==== 
 + 
 +Pixy2 uses filtering to determine if a given block is likely to be valid or just a false positive detection. ​ Increasing the **Block filtering** in the **Expert** tab can reduce the number of false positive detections. ​ The cost of increasing the block filtering is longer latency when detecting new objects. ​ That is, it will take Pixy2 longer to report detection of a new object and add it to the list of tracked objects. ​ Once an object is added to Pixy2'​s list of tracked objects, the position of each object is not filtered so that the dynamics of the object'​s reported position/​motion isn't affected. ​  
 + 
 + 
 +{{wiki:​v2:​image_522.png}}
  
  
wiki/v3/some_tips_on_generating_color_signatures_2.1537493123.txt.gz · Last modified: 2018/09/21 01:25 by pixycam