<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:uploading_new_firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:v2:uploading_new_firmware [2018/06/06 20:13]
pixycam [PixyMon]
wiki:v2:uploading_new_firmware [2018/06/06 20:40] (current)
pixycam [Uploading New Firmware]
Line 3: Line 3:
  
  
-====== Uploading ​New Firmware ​======+====== Uploading ​new firmware ​======
  
 Pixy2 uses a ROM-based algorithm to upload new firmware into flash memory over USB, which makes Pixy2 "​unbrickable"​ - that is, you will //always// be able to recover Pixy2 from an unsuccessful firmware upload or a "​bad"​ version of firmware. Pixy2 uses a ROM-based algorithm to upload new firmware into flash memory over USB, which makes Pixy2 "​unbrickable"​ - that is, you will //always// be able to recover Pixy2 from an unsuccessful firmware upload or a "​bad"​ version of firmware.

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on “Create this page”.

wiki/v2/uploading_new_firmware.txt · Last modified: 2018/06/06 20:40 by pixycam