<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:my_pantilt_is_acting_sort_of_crazy

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:v2:my_pantilt_is_acting_sort_of_crazy [2018/11/14 23:21]
jfrench deleted extra word
wiki:v2:my_pantilt_is_acting_sort_of_crazy [2018/12/26 20:40] (current)
jfrench added try unplugging one servo
Line 7: Line 7:
  
 If you are powering Pixy through the Arduino cable instead of through the USB cable, or the [[wiki:​v2:​Powering_Pixy|I/​O connector]],​ the servos are likely not going to get enough power. This is because the Arduino typically can't source enough current for the servos, and the Arduino cable tends to drop significant voltage. There are more details [[wiki:​v2:​Powering_Pixy|here]] on different powering methods. If you are powering Pixy through the Arduino cable instead of through the USB cable, or the [[wiki:​v2:​Powering_Pixy|I/​O connector]],​ the servos are likely not going to get enough power. This is because the Arduino typically can't source enough current for the servos, and the Arduino cable tends to drop significant voltage. There are more details [[wiki:​v2:​Powering_Pixy|here]] on different powering methods.
 +
 +One way to check if you have a power issue: if you connect only one servo - that is, try unplugging one - does the issue persist?
 +
 +If unplugging a servo solves it, that would point to current draw beyond the capabilities of your USB port or cable.
  
  

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on “Create this page”.

wiki/v2/my_pantilt_is_acting_sort_of_crazy.txt · Last modified: 2018/12/26 20:40 by jfrench