Differences

This shows you the differences between two versions of the page.

--- wiki:v2:my_pantilt_is_acting_sort_of_crazy [2018/07/09 21:07]
pixycam
+++ wiki:v2:my_pantilt_is_acting_sort_of_crazy [2018/11/14 23:21]
jfrench deleted extra word
@@ Line 40: / Line 40: @@
 ===== 7. Test the servos =====
-Bring up the console in PixyMon by selecting **View➜console**.  Then and hit the stop button (upper left corner of PixyMon). In the console window type this, hitting <return> after each line:
+Bring up the console in PixyMon by selecting **View➜console**.  Then hit the stop button (upper left corner of PixyMon). In the console window type this, hitting <return> after each line:
 <code>
@@ Line 53: / Line 53: @@
 {{wiki:v2:image_248_2.jpg?500}}
-The measured voltage should be 4.9V or above with the other servo under load.  If the voltage is less than 4.9V investigate your power source's ability to deliver at least 500mA.
+The measured voltage should be 4.9V or above with the other servo under load.  If the voltage is less than 4.9V, investigate your power source's voltage and its ability to deliver at least 500mA.
-Regardless, send us an email describing your experience (<support@charmedlabs.com>).
+Regardless, send us an email describing your experience (<support@pixycam.com>).

Documentation