Differences

This shows you the differences between two versions of the page.

--- wiki:v2:i_get_the_message_-22no_pixy_devices_have_been_detected-22_in_pixymon [2018/04/09 21:52]
jfrench - Imported by DokuWiki Advanced Plugin
+++ wiki:v2:i_get_the_message_-22no_pixy_devices_have_been_detected-22_in_pixymon [2018/08/22 22:17]
jfrench updated support email
@@ Line 8: / Line 8: @@
-===== 1. Do you have another USB cable you can try real quick? =====
+===== 1. Do you have another USB cable you can try? =====
 Bad USB cables are a common problem.
-===== 2. If you have a pan/tilt mechanism, unplug the servos, just in case. =====
+===== 2. If you have a pan-tilt mechanism, unplug the servos, just in case. =====
 The servos don't affect USB communications, but a defective servo might. Unplug the servos from your Pixy just to make sure they are not causing problems.
@@ Line 57: / Line 57: @@
 ===== 5. Reload firmware onto your Pixy. =====
-Follow the directions [[wiki:v2:Uploading_New_Firmware|here]] to upload the latest firmware onto your Pixy. If your Pixy won't accept new firmware or you have problems, please contact us (<support@charmedlabs.com>).
+Follow the directions [[wiki:v2:Uploading_New_Firmware|here]] to upload the latest firmware onto your Pixy. If your Pixy won't accept new firmware or you have problems, please contact us (<support@pixycam.com>).

Documentation