Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.





====== Save/load/restore Pixy2's parameters ======

Pixy2 stores several parameters such as the color signatures, signature ranges, servo limits, data out port, UART baudrate, etc. in flash memory so they can be recalled and used for subsequent power cycles. You can save these parameters on your computer and reload them onto your Pixy2 later, or even copy them onto another Pixy2.


==== Saving parameters ====

You first need to save the parameters into a local file onto your computer. Select **File➜Save Pixy parameters...** PixyMon will bring up a file selection dialog. Choose a suitable filename and press **OK**. The parameters will then be transferred from your Pixy and saved in the file you chose.


==== Loading parameters ====

To load previously saved parameters onto your Pixy2, select **File➜Load Pixy parameters...** PixyMon will bring up a file selection dialog. You can then choose the file you previously saved and press **OK**. PixyMon will then load the parameters contained in the file onto your Pixy2.


==== Restoring default parameters ====

To restore the default values for all of Pixy2's parameters, select **File➜Restore default parameters**.  Pixy2 will then write all of the default parameters for you.

Documentation

User Tools

Site Tools

Page Tools