<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:hooking_up_pixy_to_lego

Hooking up Pixy to your LEGO brick

The LEGO version of Pixy comes out of the box ready to talk to your LEGO EV3 brick. To get Pixy and your LEGO brick talking to each other, use the supplied cable to connect the two. Use the pictures below as a guide.

This guide will get you up and running quickly with Pixy2 and LEGO Mindstorms EV3. You must have a LEGO Mindstorms EV3 brick with a fresh set of batteries. We try to be as detailed as possible in this guide, but it helps if you are somewhat familiar with how to use your LEGO Mindstorms system.

If you have LEGO Mindstorms NXT, we're sorry, but we no longer support NXT.

Please follow this guide closely and by all means, don't skip any steps!

1. Install PixyMon v2 on your PC (Windows, Mac or Linux)

If you're just getting started with Pixy2, you should install PixyMon on your PC. It will allow you to configure Pixy2 and see what it sees. Choose your platform below:

2. Teach Pixy2 an object

After you install PixyMon and get it running, the next step is to teach Pixy an object, or 2, or 3…

3. Hook Pixy2 up to your LEGO brick

Your Pixy2 should now be locating and tracking the object(s) that you taught it. You're now ready to connect Pixy2 to your LEGO brick. Use the supplied cable and the pictures below as a guide.


4. Build and run a program

There are two ways to build and run a program for Pixy2. Follow the instructions on one of these pages:

The LEGO Mindstorms EV3 Home App is not supported at this moment. Contact us if you think you can help us with this.

Troubleshooting

If the above links don't solve your issue, or if you have questions or suggestions, please send them to support@pixycam.com. We also have a public forum where you can ask technical questions about the Pixy2 software or hardware, and learn what the Pixy community is up to.

Where to go from here

Thanks again for your support!

2018/04/09 21:52 · jfrench
wiki/v2/hooking_up_pixy_to_lego.txt · Last modified: 2019/01/31 02:38 by pixycam