Documentation

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 1. Introduction ======

The following procedure outlines the steps required to build the 'hello_pixy' example on a Raspberry Pi using the Raspberrian disribution. The 'hello\_pixy' example is a simple program that demonstrates how to read blocks and send commands to the Pixy over USB like PixyMon.

You will need:

  * SD Card with NOOBS 1.3.9 installed
  * USB Hub with at least three ports
  * Pixy updated to latest firmware (1.0.2)
  * libpixyusb version is 0.3

NOOBS is available from the Raspberry Pi website here: http://www.raspberrypi.org/downloads/


====== 2. Procedure ======


===== 2.1. Raspberry Pi Hardware Setup =====


==== 2.1.1. Connect your Raspberry Pi to the Internet ====

Using an Ethernet cable, connect the Raspberry Pi to an internet source as shown below.

{{wiki:img:c915bad8138d82804e0f7f1360e4bbb54877be2f.jpg?400}}


==== 2.1.2. Connect your Raspberry Pi to a video display ====

Using an HDMI cable, connect the Raspberry Pi to a video display as shown below.

{{wiki:img:f3e7d4db3cdd88a0b0271ecee6465a8c3ec70a31.jpg?400}}


==== 2.1.3. Connect Keyboard, Mouse, and Pixy to USB hub ====

The Raspberry Pi only has two USB ports, so a hub is needed to connect Pixy, a keyboard, and mouse simultaneously. Using the hub, connect your keyboard, mouse, and Pixy to the Raspberry Pi.

{{wiki:img:0ba4d834c473bc80612ef7d56b16f651885e1359.jpg?400}}

{{wiki:img:0f3cc1187a5d1786ac8475c3593760ca12faf4f4.jpg?400}}


==== 2.1.4. Insert NOOBS SD Card ====

{{wiki:img:fb504ec6eb8315298494cb0af421c2f1a7b0cd1b.jpg?400}}


==== 2.1.5. Connect power to Raspberry Pi ====


===== 2.2. Raspberry Pi Software Setup =====


==== 2.2.1. Install Raspberrian ====

On first boot, NOOBS will display a list of install options for the Raspberry Pi. Select Raspberrian and click the install button.

{{wiki:img:3813c1ec648f985df1feb6dc07532fc5396cd02d.jpg?400}}

Click the 'Yes' button to confirm installing.

{{wiki:img:c2c578b0804acf6d6de033b52a674c81f463ebd1.jpg?400}}

The installer will begin installing Raspberry Pi system files. This will take some time.

{{wiki:img:ce2a12811782166aab553eeb45c023b5278056b6.jpg?400}}

When the installer is finished, click the 'OK' button to restart.

{{wiki:img:60475cf88d2bc03143339e1526fe3f4671bb9511.jpg?400}}

When the Raspberry Pi boots, the configuration menu will be displayed. Select the 'Enable Boot to Desktop/Scratch...' option.

{{wiki:img:dc100ed14d7353cd103fbee235d9459b39f847f6.jpg?400}}

Select 'Desktop log in as user pi at the graphical desktop' and select 'OK'.

{{wiki:img:03b03c074fa339660ba61dce1662da34476ae320.jpg?400}}

Select 'Finish' to exit the configuration menu.

{{wiki:img:796d1759f69b82f172558c9c1b92238d9a8e412c.jpg?400}}

Select 'Okay' to reboot.

{{wiki:img:7fc275462ba3c4b1b4e9ee2a5b2a5a0c29c605ff.jpg?400}}


===== 2.3. Software Dependency Installation =====

From the Raspberry Pi desktop, start the LXTerminal application.

{{wiki:img:d8ffb7ac38d09d2f5f35ab1bb3d57dd582f0b736.jpg?400}}


==== 2.3.1. Install libusb ====

In the terminal window type:

''%%sudo apt-get install libusb-1.0-0.dev%%''


==== 2.3.2. Install libboost ====

In the terminal window type:

''%%sudo apt-get install libboost-all-dev%%''


==== 2.3.3. Install cmake ====

In the terminal window type:

''%%sudo apt-get install cmake%%''


===== 2.4. Install Pixy Source Code =====

In the terminal window type:

''%%git clone https://github.com/charmedlabs/pixy2.git%%''


===== 2.5 Build and install libpixyusb =====


==== 2.5.1. Build the library ====

In the terminal window type:

''%%cd pixy/scripts%%''\\
''%%./build_libpixyusb.sh%%''


==== 2.5.2. Install the library ====

In the terminal window type:

''%%sudo ./install_libpixyusb.sh%%''


===== 2.6. Running the 'hello_pixy' example =====


==== 2.6.1. Build the example ====

In the terminal window type:

''%%./build_hello_pixy.sh%%''


==== 2.6.2. Run the example ====

In the terminal window type:

''%%cd ../build/hello_pixy%%''\\
''%%sudo ./hello_pixy%%''

The output should look like something below:

''%%Hello Pixy:%%''\\
''%% Example Version: 0.3%%''\\
''%% Pixy Firmware Version: 1.0.2%%''\\
''%%Detecting blocks...%%''\\
''%%[sig: 1 w: 11 h: 17 x:149 y: 46]%%''\\
''%%[sig: 1 w:  9 h: 21 x:148 y: 46]%%''\\
''%%[sig: 1 w: 14 h: 21 x:151 y: 45]%%''\\
''%%[sig: 1 w: 10 h: 19 x:149 y: 47]%%''\\
''%%[sig: 1 w:  8 h: 16 x:148 y: 49]%%''\\
''%%[sig: 1 w:  9 h: 19 x:148 y: 45]%%''\\
''%%[sig: 1 w: 12 h:  6 x:150 y: 54]%%''\\
''%%[sig: 1 w: 15 h: 18 x:151 y: 46]%%''\\
''%%[sig: 1 w: 11 h:  5 x:149 y: 54]%%''\\
''%%[sig: 1 w:  9 h:  7 x:148 y: 49]%%''\\
''%%[sig: 1 w: 11 h:  5 x:149 y: 50]%%''\\
''%%[sig: 1 w:  8 h:  6 x:148 y: 47]%%''\\
''%%[sig: 1 w: 10 h:  7 x:149 y: 51]%%''

The example does the following

  - Connects to Pixy using USB
  - Displays firmware version installed on Pixy
  - Block information is displayed if color signatures have been set and if the signatures are currently being detected by Pixy.
Documentation

User Tools

Site Tools

Page Tools
