Differences

This shows you the differences between two versions of the page.

@@ Line 1: / Line 1: @@
+====== Expert Tab ======
+This tab contains more advanced parameters for adjusting various Pixy things. To bring up the Expert Tab, first bring up the Configure Dialog (click on the gear icon or select **File➜Configure**). Now select the **Expert** tab under **Pixy Parameters**.
+{{wiki:img:60a631c42b2f473e4bc80a1b6fdf2025f5d82879.jpg}}
+  * **Color code multiplier:** The signatures associated with color codes can be more inclusive, because false positives are less likely. Also, the color swatches used with color codes may be somewhat reflective, which requires a more inclusive signature. The **Color code multiplier** is multiplied by the corresponding **Signature range** (in the [[wiki:v2:Signature_Tuning_Pane|Signature Tuning Tab]]) to create the signature range for the color code.
+  * **Color code mode:** This parameter sets the behavior of color codes, including enabling/disabling. Hovering the mouse over the parameter will provide information on the available settings.\\
+**Enabled:** Color codes are enabled, normal mode.\\
+**Disabled:** Color codes are disabled.\\
+**Color codes only:** Only color codes are reported. Objects that match non-color-code signatures will not be reported.\\
+**Mixed:** This is the same as normal color code mode, but Pixy will also report color-code signatures that aren't part of color codes. (Normally, Pixy only reports color-code signatures that are part of color codes -- 2 or more color-code signatures that are close together.)
+  * **Signature teach threshold:** This parameter applies when you are teaching Pixy a signature using the button-push method. It allows you to adjust how inclusive Pixy is when determining which pixels are part of the object you are trying to teach. You can find more information [[wiki:v2:Some_Tips_on_Generating_Color_Signatures_2|here]].
+The short video below shows the teach threshold in action:
+{{youtube>tJ7CZfvsbz8}}
+  * **LED brightness:** sets the brightness of Pixy's RGB LED. Pixy's LED is quite bright if you want it to be (too bright to look at!)
+  * **Startup program:** This parameter sets the program that gets executed upon power-up. The available programs are listed in the pulldown menu.
+  * **Debug:** sets the debug level within Pixy. Setting the value to 0 means that no debugging information is displayed.

Documentation

User Tools

Site Tools

Differences

Page Tools