<< return to Pixycam.com

User Tools

Site Tools


wiki:v2:assembling_pantilt_mechanism

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
wiki:v2:assembling_pantilt_mechanism [2018/10/24 21:31]
pixycam
wiki:v2:assembling_pantilt_mechanism [2019/02/13 21:10] (current)
jfrench
Line 92: Line 92:
  
  
-14 - Plug the servo wires into Pixy's servo connector.  ​The pan servo goes on the left-side of the connector; the tilt servo goes on the right-side of the connector. ​ (Which is the tilt axis?  It's the one that's held down by the cable ties.)+14 - Plug the servo wires into Pixy's servo connector.  ​Looking at the back of Pixy2, the pan servo goes on the left-side of the connector; the tilt servo goes on the right-side of the connector. ​ (Which is the tilt axis?  It's the one that's held down by the cable ties.)
  
 {{wiki:​v2:​img_5176_result.jpg?​640}} {{wiki:​v2:​img_5176_result.jpg?​640}}

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on “Create this page”.

wiki/v2/assembling_pantilt_mechanism.txt · Last modified: 2019/02/13 21:10 by jfrench