<< return to Pixycam.com

User Tools

Site Tools


wiki:v1:hooking_up_pixy_to_a_raspberry_pi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

wiki:v1:hooking_up_pixy_to_a_raspberry_pi [2017/12/19 21:33]
jfrench - Imported by DokuWiki Advanced Plugin
wiki:v1:hooking_up_pixy_to_a_raspberry_pi [2018/01/08 22:45] (current)
jfrench
Line 8: Line 8:
 ====== 1. Introduction ====== ====== 1. Introduction ======
  
-The following procedure outlines the steps required to build the '​hello_pixy'​ example on a Raspberry Pi using the Raspberrian disribution. The 'hello_pixy' example is a simple program that demonstrates how to read blocks and send commands to the Pixy over USB like PixyMon.+The following procedure outlines the steps required to build the '​hello_pixy'​ example on a Raspberry Pi using the Raspberrian disribution. The 'hello\_pixy' example is a simple program that demonstrates how to read blocks and send commands to the Pixy over USB like PixyMon.
  
 You will need: You will need:

This topic does not exist yet

You've followed a link to a topic that doesn't exist yet. If permissions allow, you may create it by clicking on “Create this page”.

wiki/v1/hooking_up_pixy_to_a_raspberry_pi.txt · Last modified: 2018/01/08 22:45 by jfrench