wiki:v1:blocks_pane
Differences
This shows you the differences between two versions of the page.
|
wiki:v1:blocks_pane [2017/12/19 21:33] jfrench - Imported by DokuWiki Advanced Plugin |
wiki:v1:blocks_pane [2018/01/08 22:14] (current) jfrench image size |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| Pixy can detect/track literally hundreds of objects at the same time. Each detected object is reported as a "block," with a specific signature number, location within the image, and size (width and height). The blocks are reported through one of its serial ports (UART, SPI, I2C, USB, analog and digital output) for each frame (every 20 milliseconds) . This tab contains some parameters for controlling the number of blocks Pixy will report for each frame. To bring up the Block Tab, first bring up the Configure Dialog (click on the gear icon or select **File➜Configure**). Now select the **Blocks** tab under **Pixy Parameters**. | Pixy can detect/track literally hundreds of objects at the same time. Each detected object is reported as a "block," with a specific signature number, location within the image, and size (width and height). The blocks are reported through one of its serial ports (UART, SPI, I2C, USB, analog and digital output) for each frame (every 20 milliseconds) . This tab contains some parameters for controlling the number of blocks Pixy will report for each frame. To bring up the Block Tab, first bring up the Configure Dialog (click on the gear icon or select **File➜Configure**). Now select the **Blocks** tab under **Pixy Parameters**. | ||
| - | {{wiki:img:4e1c68c558a58c4b9b382efc9ed087445cf10b75.jpg?400}} | + | {{wiki:img:4e1c68c558a58c4b9b382efc9ed087445cf10b75.jpg}} |
| * **Max blocks:** This parameter sets maximum total number of blocks (objects) Pixy will report per frame. For example, if you set this parameter to 2, Pixy will report a maximum of 2 objects (the 2 largest objects) regardless of which signature the blocks belong to, and all other detected objects will not be reported. | * **Max blocks:** This parameter sets maximum total number of blocks (objects) Pixy will report per frame. For example, if you set this parameter to 2, Pixy will report a maximum of 2 objects (the 2 largest objects) regardless of which signature the blocks belong to, and all other detected objects will not be reported. | ||
wiki/v1/blocks_pane.txt · Last modified: 2018/01/08 22:14 by jfrench
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
