Pixy2 Quick Links
Basics
Connecting Pixy2 to…
Pixy2 Modes / Programs
Software and Support
Sidebar
wiki:v3:video_expert
Video Expert tab
This tab (for now) doesn't contain much. In subsequent versions it may contain more advanced parameters for adjusting various video things. To bring up this tab, you must be running the video program by clicking on the Raw video icon 
in the toolbar, or selecting it in the Program menu, and then bringing up the Configure Dialog (click on the gear icon 
or select File➜Configure). Now select the Expert tab under Pixy Parameters.
- Default program: This parameter shows up in all Expert tabs regardless of the program that's currently running. It sets the program that gets executed upon power-up. The available programs are listed in the pulldown menu.
- Program select on power-up: This parameter shows up in all Expert tabs regardless of the program that's currently running. Enabling this will enable the button program selection upon power-up.
- Debug: This parameter shows up in all Expert tabs regardless of the program that's currently running. It sets the debug level within Pixy2. Setting the value to 0 means that no debugging information is displayed.
wiki/v3/video_expert.txt · Last modified: 2018/09/19 21:05 by jfrench
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
