====== Pixymon Configuration Parameters ======

  * Max blocks
    * Sets the maximum total blocks sent per frame.
    * default: 1000
  * Max blocks per signature
    * Sets the maximum blocks for each color signature sent for each frame.
    * default: 1000
  * Min block area
    * Sets the minimum required area in pixels for a block. Blocks with less area won't be sent.
    * default: 20
  * Min saturation
    * Sets the minimum allowed color saturation for when generating color signatures. Applies during teaching.
    * default: 10.0
  * Hue spread
    * Sets how inclusive the color signatures are with respect to hue. Applies during teaching.
    * default: 1.0
  * Saturation spread
    * Sets how inclusive the color signatures are with respect to saturation. Applies during teaching.
    * default: 1.0
  * Data out port
    * Selects the port that's is used to output data. 0=SPI, 1=I2C, 2=UART, 3=analog/digital x, 4=analog/digital y
    * default: 0
  * I2C address
    * Sets the I2C address if you are using I2C data out port.
    * default: 0x54
  * UART baudrate
    * Sets the UART baudrate if you are using UART data out port.
    * default: 19200
  * Default program
    * Selects the program number that's run by default upon power-up.
    * default: 0
  * Brightness
    * Sets the average brightness of the camera, can be between 0 and 255.
    * default: 80