wiki:v1:hooking_up_pixy_to_a_raspberry_pi
Differences
This shows you the differences between two versions of the page.
|
wiki:v1:hooking_up_pixy_to_a_raspberry_pi [2017/12/19 21:33] jfrench - Imported by DokuWiki Advanced Plugin |
wiki:v1:hooking_up_pixy_to_a_raspberry_pi [2018/01/08 22:45] (current) jfrench |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| ====== 1. Introduction ====== | ====== 1. Introduction ====== | ||
| - | The following procedure outlines the steps required to build the 'hello_pixy' example on a Raspberry Pi using the Raspberrian disribution. The 'hello_pixy' example is a simple program that demonstrates how to read blocks and send commands to the Pixy over USB like PixyMon. | + | The following procedure outlines the steps required to build the 'hello_pixy' example on a Raspberry Pi using the Raspberrian disribution. The 'hello\_pixy' example is a simple program that demonstrates how to read blocks and send commands to the Pixy over USB like PixyMon. |
| You will need: | You will need: | ||
wiki/v1/hooking_up_pixy_to_a_raspberry_pi.1513719205.txt.gz ยท Last modified: 2017/12/19 21:33 by jfrench
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
