This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | |||
wiki:diy_lego_cable [2017/11/23 03:06] jfrench Imported by DokuWiki Advanced Plugin |
— (current) | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | |||
- | |||
- | |||
- | |||
- | ====== LEGO cable for Pixy ====== | ||
- | |||
- | You can order a cable through some of our distributors. Notably, Robotshop is selling them [[http://www.robotshop.com/en/pixy-cmucam5-lego-cable.html|here]]. | ||
- | |||
- | Making your own LEGO cable requires a few parts. It's recommended that you use a 10-pin IDC connector, like [[https://www.sparkfun.com/products/8535|this]], which is already crimped with a ribbon cable, or [[https://www.sparkfun.com/products/10650|this]]. You also need a LEGO Mindstorms sensor/motor cable that you don't mind chopping up, because those offset modular connectors are pretty hard to find. If you have a LEGO Mindstorms EV3 or NXT kit, you have several of these, but if you don't want to sacrifice one, you can buy them [[http://shop.lego.com/en-US/EV3-Cable-Pack-45514|here]] or [[http://www.amazon.com/Lego-Mindstorms-45514-Cable-Pack/dp/B00I7POITY/ref=sr_1_1?ie=UTF8&qid=1443631923|here]], or possibly lots of other places too. | ||
- | |||
- | Below is the connection diagram: | ||
- | |||
- | {{wiki:img:5f4037255dc89f89cc6a0f16b6af33aab50c93ad.jpg?300}} | ||
- | |||
- | <code> | ||
- | 10-pin Conn. LEGO Cable | ||
- | |||
- | Pin 2 --> green | ||
- | Pin 5 --> yellow | ||
- | Pin 9 --> blue | ||
- | Pin 10 --> red | ||
- | </code> | ||
- | The black and white wires from the LEGO cable are not connected to anything - you can just snip them off. Similarly, pins 1, 3, 4, 6, 7, and 8 on the 10-pin IDC are not used. | ||
- | |||
- | [[wiki:Port_Pinouts|Click here for a useful diagram of which pins are which.]] | ||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||