<< return to Pixycam.com

User Tools

Site Tools


wiki:diy_lego_cable

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
wiki:diy_lego_cable [2017/11/23 02:27]
jfrench - Imported by DokuWiki Advanced Plugin
— (current)
Line 1: Line 1:
- 
- 
- 
- 
-====== LEGO cable for Pixy ====== 
- 
-You can order a cable through some of our distributors. Notably, Robotshop is selling them [[http://​www.robotshop.com/​en/​pixy-cmucam5-lego-cable.html|here]]. 
- 
-Making your own LEGO cable requires a few parts. It's recommended that you use a 10-pin IDC connector, like [[https://​www.sparkfun.com/​products/​8535|this]],​ which is already crimped with a ribbon cable, or [[https://​www.sparkfun.com/​products/​10650|this]]. You also need a LEGO Mindstorms sensor/​motor cable that you don't mind chopping up, because those offset modular connectors are pretty hard to find. If you have a LEGO Mindstorms EV3 or NXT kit, you have several of these, but if you don't want to sacrifice one, you can buy them [[http://​shop.lego.com/​en-US/​EV3-Cable-Pack-45514|here]] or [[http://​www.amazon.com/​Lego-Mindstorms-45514-Cable-Pack/​dp/​B00I7POITY/​ref=sr_1_1?​ie=UTF8&​qid=1443631923|here]],​ or possibly lots of other places too. 
- 
-Below is the connection diagram: 
- 
-{{:​img/​5f4037255dc89f89cc6a0f16b6af33aab50c93ad.jpg}} 
- 
-<​code>​ 
-10-pin Conn.       LEGO Cable 
- 
-Pin 2      --> ​    green 
-Pin 5      --> ​    ​yellow 
-Pin 9      --> ​    blue 
-Pin 10     ​--> ​    red 
-</​code>​ 
-The black and white wires from the LEGO cable are not connected to anything - you can just snip them off. Similarly, pins 1, 3, 4, 6, 7, and 8 on the 10-pin IDC are not used. 
- 
-[[projects/​cmucam5/​wiki/​Port_Pinouts|Click here for a useful diagram of which pins are which.]] 
- 
- 
- 
- 
- 
- 
  
wiki/diy_lego_cable.1511404031.txt.gz ยท Last modified: 2017/11/23 02:27 by jfrench